98- 11 Ford Ranger Adjustabe Upper Control Arms

Expect a 2-3 week lead time as of now. Until I get things rolling better and stocked up on components to make them. These will come powder coated black. 98-11 Ford Ranger Uniball Adjustable Upper Control Arms set. These arms are designed to give you maximum camber adjustment and maximum travel. Using 1" Uniballs, 3/4" Heims joints, heat treated ball joint pins and 1-1/4" DOM Tubing. The arm with the weld dot on the back side of the Uniball cup is the driver side arm. You'll want to your truck already lowered a few inches before considering aftermarket upper arms.

These arms offer about 7/8" of adjustment on the ends, and when combined with a DJM lower arm you can lay out on a 22" wheel. 22" is definitely pushing it for a Ranger, but you can if you want to. Most guys prefer to lay out on 245/35/20. A little more tire sidewall makes for a better ride. Note. If you plan to bag your truck, don't think just because you have aftermarket arms you won't need to do some trimming to your frame. The frame will need some trimming where the lower arm will hit. I have pics of the cuts on my Facebook page.

Note: When you take out lots of camber when laid out you'll gain positive camber when at full lift. Find your happy medium, align the truck at your ride height. Adding raised upper arm mounts is another way to battle negative camber. Combined with the arms you'll have the best adjustment available.